Mounts
Home

Electronics

Accessories & Supplies

Mounts

LCD Articulating Wall Mount

LCD Articulating Wall Mount
View larger imageEmail a friend

LCD Articulating Wall Mount

Keep your flat panel TV secured to the wall with this moveable Vantage Point 200mm LCD mount. The piece has an X-shape back and a swivel arm bar that allows for tilting, panning and rotating on the wall or ceiling. Mount is VESA compliant and carries a maximum load of 100 lb. Made of aluminum die cast. Made in USA.

  • VESA 50mm, 75mm, 100mm and 200mm compatible

  • 180 degree rotational at wall

  • Up and down tilt

  • Adjustable tension

  • Includes mounting hardware

SKU: 

VPAX2AWL01S

In Stock
Availability: Usually ships in 1-2 business days
Only 4 left in stock, order soon!
List Price: $129.99
Our Price: $58.12
You Save: $71.87 (55%)
Product Details:
Product Length: 15.0 inches
Product Width: 4.0 inches
Product Height: 13.0 inches
Product Weight: 9.0 pounds
Package Length: 16.1 inches
Package Width: 13.0 inches
Package Height: 4.2 inches
Package Weight: 10.05 pounds
Average Customer Rating: based on 7 reviews

Customer Reviews:
Average Customer Review:4.0 ( 7 customer reviews )
Write an online review and share your thoughts with other customers.

Most Helpful Customer Reviews

6 of 6 found the following review helpful:

4Articulating Arm Review  Sep 08, 2005
By Ellen J. Jurczak "frankthecat"
The wall mount is fine but was somewhat difficult for one person to install - the TV is difficult to attach. Also, it wasn't described very well and the dimensions were not included. I didn't know how it was going to fit or work until I received it. It would also be nice if there was some way to attach the TV cables to the arm or route them through the arm so they don't show. Now that I have mounted it, I like it.

4 of 4 found the following review helpful:

5Excellent Product  Dec 27, 2006
By aje3892 "Adam"
I just installed this about 4 hours ago. It took me an hour, even with my drill's batteries needing a charge. The trick is to follow the instructions. I looked around at many wall mounts and this was the best choice. It is recommended to mount it into a stud. Luckily in order for it to be centered on the wall I needed a stud approximately 16 inches to the left/right, and there was one there. It gives you offset holes to screw into a stud if you absolutely need it to be in a particular location.

Process:

1 - Find Stud/Location to hang wall mount

2 - Place wall mounting bracket on the wall and mark drill hole.

3 - Using a 3/16" drill bit drill about 1 1/2 inches into the stud

4 - Screw long wood screw into the wall bracket/stud using a low speed drill.

5 - Approximately level vertically using a bubble level. Mark slotted hole and drill 3/16" hole again 1 1/2 inches deep into the stud.

6 - Screw long wood screw into the wall bracket/stud using a low speed drill until there is just enough play to move the bracket so it can be leveled finally.

7 - Level wall bracket vertically using level and tighten both screws.

8 - Finish inserting the last two screws.

9 - Follow the instructions on the sheet for the rest. Be sure to install the break mechanism that is supplied with the device. It really works well and you can tighten the stiffness of both arms.

I left the front tilt screws just loose enough that I can place the LCD at any tilt without it falling all the way forward. I used a level to level the LCD horizontally and tightened those screws pretty good so it wouldn't lean on me.

It looks great and I can sit in my kitchen and pull it from the wall and angle it towards me, or I can sit on the couch and have it tight against the wall.

I'm going to look into zip tying the wires to the arm.

3 of 3 found the following review helpful:

4Works for me  Jul 27, 2006
By Tyler Forge "realist"
Simple and does the job. No surprises. I had no trouble setting it up by myself. The trick is putting the TV on the arm before putting the arm into the wall mount. Gravity does all the work that way.

1 of 1 found the following review helpful:

3Good quality, but poor instructions for mounting  Feb 13, 2009
By That Lake Girl "h2oorsnowski"
Constrution of this TV mount seems good and it is sturdy. The instructions for mounting are very poor (this coming from an engineer's viewpoint). Make sure you will be able to mount to a stud before purchasing this product. Once it was finally on the wall, we were pleased with the performance. It has many easy adjustments for different viewing angles. Also, it is sometimes difficult to tell from the verbage, but it is compatible with 200x100 VESA configuration.

5Awesome!  Aug 26, 2013
By red judy
Bought this for my daughter. She wanted to mount her TV, but not have a limited range of movement. This mount definitely fit the bill. Quick and easy to install. Received quicker than expected too!

See all 7 customer reviews on Amazon.com
You may also like ...
Stretch Wrap 18" Wide x 1500' Long
Stretch Wrap 18" Wide x 1500' Long
Our Price: $20.33
Add to Cart
Kreg R3 Pocket Hole Jig System
Kreg R3 Pocket Hole Jig System
List Price: $44.99
Our Price: $41.76
You Save: $3.23 ( 7%)
Add to Cart
Web business powered by Amazon WebStore